Programmable 8 Looper Loop Pedal True Bypass Guitar Effects 60 Presets

Programmable-8-Looper-Loop-Pedal-True-Bypass-Guitar-Effects-60-Presets-01-vrl

April 18, 2019 | Posted in programmable | By

Programmable 8 Looper Loop Pedal True Bypass Guitar Effects 60 Presets
Programmable 8 Looper Loop Pedal True Bypass Guitar Effects 60 Presets
Programmable 8 Looper Loop Pedal True Bypass Guitar Effects 60 Presets

Programmable 8 Looper Loop Pedal True Bypass Guitar Effects 60 Presets
All 8 Switches can be programmed to engage any combination of the 8 loops (up to 8 pedals can be engaged at once). 60 presets – Allowing you to save 60 combinations of pedals. Plug your chosen effect pedals into the SEND and RECEIVE sockets, then engage or disengage them using the footswitches. When one of the loops is’off’, your guitar sound is routed directly to your amp. When it is’on’, your signal is routed through the effects pedals. Switch 1 could be programmed to activate Loops 1, 3 & 4. Switch 2 could be programmed to activate Loops 2,3,5, & 8. Switch 3 could be programmed to activate Loops 8. Switch 4 could be programmed to activate Loops 1,2,3,4,5,6,7 & 8. Hold down the footswitch that you would like to program for 2-3 seconds and release. Press the Loops that you would like to be activated by the switch you’re programming (The LEDs will indicate the pedals that you’ve selected). Re-hold the initial footswitch for 3 seconds to finish. This can be repeated for the 7 remaining footswitches. Programmable vs On/Off Mode. Each switch can either be set to Programmable or On/Off mode. In programmable mode, the previously active switches disengage when a new switch is pressed. In On/Off mode, the previously active switches stay on when a new switch is pressed, allowing you to add to existing effects. To toggle between Programmable and On/Off mode, hold your chosen switch down for 5+ seconds. The switch will flash fast for 3 seconds. You can mix and match between Programmable and On/Off modes. So for example: you could have 3 switches set to Programmable and 5 switches set to On/Off mode. Standard-Preset mode vs Multi-Preset mode. In Standard-Preset mode all 8 switches act as a preset, so pressing any of the switches will engage a preset. In Multi-Preset mode, 2 of the switches (the right 2 switches) act as bank change switches to allow you to change banks of presets – the remaining 6 switches are for selecting the presets – there are 10 banks of 6 presets, so 60 presets in total. To toggle between Standard-Preset mode and Multi-Preset mode, hold switches 3 and 4 whilst inserting the power. Re-press the active switch to bypass all loops (In programmable mode). Add True Bypass to any effects pedal. All 8 pedals can be engaged at once. Program any of the switches to activate any of the loops. Clean up your tone. The loops engage immediately when a switch is pressed. Silent Switches (with Smooth clickless action). Suitable for Live use. The item “Programmable 8 Looper Loop Pedal True Bypass Guitar Effects 60 Presets” is in sale since Thursday, September 18, 2014. This item is in the category “Musical Instruments\Guitars & Basses\Parts & Accessories\Effects Pedals\Loopers & Samplers”. The seller is “buzz_electronics” and is located in Dunmow. This item can be shipped worldwide.
  • Parts Type: True Bypass, Programmable
  • Type: Effects Pedals
  • Item Type: Buzz Electronics, Programmable Looper, Looper
  • Country/Region of Manufacture: United Kingdom
  • MPN: Buzz-P8
  • Brand: Buzz Electronics
  • To Fit Guitar: Any
  • Case Material: Aluminium

Programmable 8 Looper Loop Pedal True Bypass Guitar Effects 60 Presets

Read More...

Programmable MIDI 8 Looper True Bypass Guitar Effects Loop Pedal Aluminium

Programmable-MIDI-8-Looper-True-Bypass-Guitar-Effects-Loop-Pedal-Aluminium-01-ryc

March 30, 2019 | Posted in programmable | By

Programmable MIDI 8 Looper True Bypass Guitar Effects Loop Pedal Aluminium
Programmable MIDI 8 Looper True Bypass Guitar Effects Loop Pedal Aluminium
Programmable MIDI 8 Looper True Bypass Guitar Effects Loop Pedal Aluminium

Programmable MIDI 8 Looper True Bypass Guitar Effects Loop Pedal Aluminium
The Programmable MIDI 8 Looper allows 8 loops to be switched at the same time as sending out MIDI commands. 60 Presets are available! Allowing you to save 60 different combinations of pedals and MIDI commands. Control 3 separate MIDI pedals per preset, all on different MIDI channels. Each preset contains the following. Any combination of the 8 loops. Up to 3 different MIDI commands (Program Change and/or Control Change). The MIDI Channel that each command above is sent on, can be programmed (MIDI Channels: 0-15). The colour of the LEDs and the 3 digit display indicate the bank that the pedal is in. 60 Presets (arranged in 10 banks of presets – 2 of the switches are for bank changes). Ability to send 3 different MIDI commands per preset (The MIDI channel of each one can be programmed). Programmable LED colours (To indicate the bank that the pedal is in). 3 digit display for programming and to display active bank and preset. Silent Switches (with Smooth clickless action). Suitable for Live use. Diecast Aluminium Enclosure (230x145x55mm). Types of MIDI command. Each preset can send up to 3 MIDI commands, which can either be Program Change Commands (PC) or Control Change commands (CC). The number of each type of command that is sent can be selected, for example, 3 PC commands could be sent, or 1 PC command and 2 CC commands. The individual MIDI Channel that each command is sent on can be programmed. 60 Presets are available, arranged in 10 banks of 6 presets. Switches 1 and 2 (the right two switches) are for changing banks. The colour of the LEDs automatically changes when the bank is changed, allowing you to easily see which bank is selected. The pedal can also be put into single bank mode, where all 8 switches are used for accessing presets. In this mode the LED colours can be programmed to be which ever colour you would like – you can program all the LEDs to be a different colour if required. Programmable vs On/Off Mode. Each switch can either be set to Programmable or On/Off mode. In programmable mode, the previously active switches disengage when a new switch is pressed. In On/Off mode, the previously active switches stay on when a new switch is pressed, allowing you to add to existing effects. Re-press the active switch to bypass all loops (In programmable mode). The item “Programmable MIDI 8 Looper True Bypass Guitar Effects Loop Pedal Aluminium” is in sale since Friday, June 28, 2013. This item is in the category “Musical Instruments\Guitars & Basses\Parts & Accessories\Effects Pedals\Loopers & Samplers”. The seller is “buzz_electronics” and is located in Dunmow. This item can be shipped worldwide.
  • Brand: Buzz Electronics
  • MPN: Buzz Electronics, Programmable Looper, Looper
  • To Fit Guitar: Any
  • Type: Effects Pedals
  • Case Material: Aluminium
  • Parts Type: True Bypass, Programmable
  • Item Type: Buzz Electronics, Programmable Looper, Looper
  • Country/Region of Manufacture: United Kingdom

Programmable MIDI 8 Looper True Bypass Guitar Effects Loop Pedal Aluminium

Read More...

Programmable 12 Looper Loop Pedal True Bypass Guitar Effects Pedal NEW

Programmable-12-Looper-Loop-Pedal-True-Bypass-Guitar-Effects-Pedal-NEW-01-dym

March 23, 2019 | Posted in programmable | By

Programmable 12 Looper Loop Pedal True Bypass Guitar Effects Pedal NEW
Programmable 12 Looper Loop Pedal True Bypass Guitar Effects Pedal NEW
Programmable 12 Looper Loop Pedal True Bypass Guitar Effects Pedal NEW

Programmable 12 Looper Loop Pedal True Bypass Guitar Effects Pedal NEW
This pedal allows you to control 12 effects pedal with a single footpress. All 12 Switches can be programmed to engage any combination of the 12 loops (up to 12 pedals can be engaged at once). Plug your chosen effect pedals into the SEND and RECEIVE sockets, then engage or disengage them using the footswitches. When one of the loops is’off’, your guitar sound is routed directly to your amp. When it is’on’, your signal is routed through the effects pedals. Switch 1 could be programmed to activate Loops 1, 3 & 4. Switch 2 could be programmed to activate Loops 2,3,5, & 10. Switch 3 could be programmed to activate Loops 8. Switch 4 could be programmed to activate Loops 1,2,3,4,5,6,7 & 12. Hold down the footswitch that you would like to program for 2-3 seconds and release. Press the Loops that you would like to be activated by the switch you’re programming (The LEDs will indicate the pedals that you’ve selected). Re-hold the initial footswitch for 3 seconds to finish. This can be repeated for the 11 remaining footswitches. Programmable vs On/Off Mode. Each switch can either be set to Programmable or On/Off mode. In programmable mode, the previously active switches disengage when a new switch is pressed. In On/Off mode, the previously active switches stay on when a new switch is pressed, allowing you to add to existing effects. To toggle between Programmable and On/Off mode, hold your chosen switch down for 5+ seconds. The switch will flash fast for 3 seconds. You can mix and match between Programmable and On/Off modes. So for example: you could have 3 switches set to Programmable and 9 switches set to On/Off mode. Re-press the active switch to bypass all loops (In programmable mode). Add True Bypass to any effects pedal. All 12 pedals can be engaged at once. Program any of the switches to activate any of the loops. Clean up your tone. The loops engage immediately when a switch is pressed. Silent Switches (with Smooth clickless action). LEDs can display either the active preset or the active loops. Suitable for Live use. The item “Programmable 12 Looper Loop Pedal True Bypass Guitar Effects Pedal NEW” is in sale since Sunday, September 28, 2014. This item is in the category “Musical Instruments\Guitars & Basses\Parts & Accessories\Effects Pedals\Loopers & Samplers”. The seller is “buzz_electronics” and is located in Dunmow. This item can be shipped worldwide.
  • Brand: Buzz Electronics
  • Parts Type: True Bypass, Programmable
  • Type: Effects Pedals
  • To Fit Guitar: Any
  • Country/Region of Manufacture: United Kingdom
  • Case Material: Aluminium
  • MPN: Buzz Electronics, Programmable Looper, Looper
  • Item Type: Buzz Electronics, Programmable Looper, Looper

Programmable 12 Looper Loop Pedal True Bypass Guitar Effects Pedal NEW

Read More...