July 21, 2022 | Posted in:handmade
1x Ricochet Pedalboard – Handmade and measuring 570x300x85mm. My design goal was to make a solid pedalboard that looked smart and contained all the extras to make it fully functioning from the outset. I’m a guitar player and I fully understand the obsessions that come along with that, so I have produced a board that contains everything I think I’d want and need. Two panel mounted Jacks (one on each side) for the start and end of your pedal chain. A panel mounted IEC/Kettle Lead for power supply. Booster feet for height adjustment when placing over a mic stand. Large 40x20mm rubber feet. Custom made 10mm foam padded soft case. Extra jacks for stereo out or FX loop. The pedalboard is manufactured from high quality 18mm poplar ply. I chose poplar because it is extremely light weight with the whole pedalboard weighing in at under 3kg, so it is a pleasure to carry around and is still as solid as a rock. The top Velcro panel is insetted into the frame for solid all round support. The Velcro/Pedal area measures 550x280mm. There is plenty of room for a Crybaby plus 8 to 10 standard sized pedals (see photo example). The optional Soft case I’ve had custom made to fit this pedalboard. It’s extremely good quality and is made of tough stuff with thick 10mm padding to keep everything inside well cushioned and protected. There’s an option to add up to two extra jacks to the amp side (left hand side) of the pedalboard for those wanting a stereo out or a send and return to the FX loop on your amp. If you want this option, simply select the number of extra jacks you require from the drop down menu and the jacks will then be fully installed for you. The holes for the extra jacks have been pre-drilled and bunged up for a neater appearance. If you wanted to expand your pedalboard with extra jacks in the future, simply remove the bungs and CAREFULLY cut away at the outside Tolex with a sharp Stanley Knife (preferably with a hooked blade). I can not take responsibility if you mess it up but if you take it slowly it’s not hard to cut away the Tolex. The booster feet are for those guitarist who may also be singers. Sometimes the mic stand needs to be pushed too far back to make room for a pedalboard or it needs to be placed at a funny angle to fit around the side of a pedalboard. I’ve lost count of how many times mic stands have fallen over on me because they where precariously balanced or the boom arm has slowly dropped away because I needed all the extension I could get to reach over the pedalboard. With these booster feet you can place the pedalboard directly over the legs of a mic stand and experience mic stand/pedalboard harmony! The booster feet pop into mounting holes along the lower back edge and are held in place via strong magnets. They can be put in and taken out in seconds and when they’re not in use they simply clip to the inside front of the pedalboard. In terms of power supplies, I’ve been mindful to leave enough room underneath to support the installation of most popular brands. Of course, I don’t own all these myself, so I’ve used the specs given by their respective websites to determine how much space I’ve allowed. I’ve included a diagram which specifies the internal dimensions of this pedalboard, please reference this along with the dimensions of your own personal power supply unit to check the fit. Remember also the large rubber feet provide an additional 20mm of height underneath the pedalboard if needed. I sell other boards if this colour scheme isn’t to your liking or if you have a particular colour scheme in mind send me a message and we’ll see what we can come up with. I can’t make any. Guarantees but I will try my best. There will be a lead time on any personalised colour scheme and I will need a deposit of some kind + there may be additional cost if I have to order the Tolex. The only thing I can’t do at the moment is change the overall size and design of the board. This item is in the category “Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Effects Pedals\Boards & Cases”. The seller is “tricky321″ and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam.
- with Soft Case: Yes
- Extra Jacks: 2
- Country/Region of Manufacture: United Kingdom
- Brand: Ricochet
- Suitable For: Effects Pedal
- Type: Pedal Board